Length Compensator and Reduction Machinery

The Oakley Roll to Length Machine is designed to produce elements of a consistent length. The length of each element is precisely measured as it exits from the roll reducer, and then the elements are elongated in the Roll to Length Machine to the preset length.

  • Elongation is accomplished by additionally reducing the diameter of the elements from 0.05mm to 0.18mm (.002” to .007”).
  • Length change is less than 30 seconds
  • Close length tolerance +/-1.5mm (0.62”) for most elements

To Learn More About Our Length Compensator and Reduction Machinery - Click the link below:

Roll to Length Machine